Gameboys in Production, by Makerfabs

Gameboys in Production, by Makerfabs

May 25, 2019

Gameboys in production, by Makerfabs

In the past 2 years, as a PCBA prototyping& small batch producer, Makerfabs is honored to be involved in many interesting projects. With the authorization of public release, by the designer, some game boy projects we produced:

1. KITE’S SUPER AIO
 
 
GAMEBOYS-IN-PRODUCTON-BY-MAKERFABS-01

Kite’s super AIO support LCD 320x240, it built in Atmega32u4 for buttons and joystick, integrated charger, SD slot, stereo amplifier, WIFI, etc, support Pi Zero, or Pi3 with optional extender.

Makerfabs helps on the mainboards prototyping& mass production for more than 2 years.
 
GAMEBOYS-IN-PRODUCTON-BY-MAKERFABS-02

Yes, there some exceptions happen in the PCBA production, such as XXX, Makerfabs discover the risk and solved them in time, to ensure the one-time pass rate >98.5%.

“Thanks for the email. Everything had been received before CNY/spring holiday (fantastic timing by the way!) and everything has been tested. There were very few failures, and none of them seemed related, so I think it's been the most successful batch yet! So good work on that. ”--- Giles Burgess

YouTube Links: https://www.youtube.com/watch?v=POw60_3HGmQ 


2. Galaxy Gaming Gameboy
 
GAMEBOYS-IN-PRODUCTON-BYMAKERFABS-03

If you want Nintendo Game Boy-style, handheld, portable console, the Galaxy Gaming Gameboy Zero PocketPi FE kit is as good as it gets. It includes fast 320×240 high contrast ratio and high viewing angle 2.6” Screen, i2S Audio, On-Screen Battery monitoring, and safe shutdown.

Makerfabs have been proud to join this project, with our cost-down suggestions for PCB/Components. PCBA production still goes on…
 
GAMEBOYS-IN-PRODUCTON-BYMAKERFABS-04
 
GAMEBOYS-IN-PRODUCTON-BYMAKERFABS-06

TinyPi Pro is a miniature gaming console based on raspberry pi. It started as a personal project to see just how small you could make a raspberry pi based handheld.

Every part of the project has been carefully selected to ensure the best possible experience, there only 1.3 inch display, with 240x240, and advanced digital audio capabilities, with a 400mah buried in its core. More important, lovely 3D printed case.

Makerfabs has been produced the PCBA for 2 rounds, with 100% pass for the first batch 20 pcs prototyping, and mass production for the 2nd round.
 
GAMEBOYS-IN-PRODUCTON-BYMAKERFABS-07
 
GAMEBOYS-IN-PRODUCTON-BYMAKERFABS-08

Unlike the above raspberry Pi-based gaming, the µgame is based on separate controller ATSAMD21E18A, It is a tiny little game console in which you can write your own games with Python. Python language is perfect for learning, but it's hard to create games, there is a lot of up-front work that needs to be done installing and configuring everything on every computer on which you want to run your game. The µgame remove all the obstacles and make it possible to just connect the device to your computer and start writing code right away.

Makerfabs has produced 3 rounds for these projects, from prototyping to mass production. Boards were 100% tested before the shipping, there is also a YouTube for how we solder the screen manually: https://www.facebook.com/Makerfabscom/videos/2289960367952908/
 
GAMEBOYS-IN-PRODUCTON-BYMAKERFABS-09