Makerfabs Daily: Maduino Lora Range Testing
Makerfabs Daily: Maduino Lora Range Distance Testing
On 2020/1/2, we made a distance test for Maduino Lora. There too much blocks in the city, so we go to the seaside after our work, to get a relative wide& open area:
![makerfabs-Lora-testing-seaside_](//v4-upload.goalsites.com/275/1577957403_makerfabs-Lora-testing-seaside_1.png)
![makerfabs-Lora-testing-seaside](//v4-upload.goalsites.com/275/1577957421_makerfabs-Lora-testing-seaside.png)
The Lora sender: we use a Maduino Lora board connected to a DHL11 sensor as the Lora Sensor, to send the temperature& humidity info:
![Makerfabs-Lora-Sendor](//v4-upload.goalsites.com/275/1577957538_Makerfabs-Lora-Sendor_1.png)
The receiver:
![Makerfabs-Lora-Receiver](//v4-upload.goalsites.com/275/1577957560_Makerfabs-Lora-Receiver_2.png)
And took them to the opposite direction by Charlin and Lan:
![Makerfabs-Lora-Teting](//v4-upload.goalsites.com/275/1577957591_Makerfabs-Lora-Teting_3.png)
In this testing, when there the distance is 3.8Km, the signal stable:
![Makerfabs-Lora-Distance-Test](//v4-upload.goalsites.com/275/1577957640_Makerfabs-Lora-Distance-Test_4.png)
As it is really late and dark, and the seashore ends, we have no way to go further to test the mass range, so we have to ends our testing today... For sender/receiver codes, available here: https://www.makerfabs.com/wiki/index.php?title=Maduino_Lora_Radio_(433M/868M)
On 2020/1/2, we made a distance test for Maduino Lora. There too much blocks in the city, so we go to the seaside after our work, to get a relative wide& open area:
![makerfabs-Lora-testing-seaside_](http://v4-upload.goalsites.com/275/1577957403_makerfabs-Lora-testing-seaside_1.png)
![makerfabs-Lora-testing-seaside](http://v4-upload.goalsites.com/275/1577957421_makerfabs-Lora-testing-seaside.png)
The Lora sender: we use a Maduino Lora board connected to a DHL11 sensor as the Lora Sensor, to send the temperature& humidity info:
![Makerfabs-Lora-Sendor](http://v4-upload.goalsites.com/275/1577957538_Makerfabs-Lora-Sendor_1.png)
The receiver:
![Makerfabs-Lora-Receiver](http://v4-upload.goalsites.com/275/1577957560_Makerfabs-Lora-Receiver_2.png)
And took them to the opposite direction by Charlin and Lan:
![Makerfabs-Lora-Teting](http://v4-upload.goalsites.com/275/1577957591_Makerfabs-Lora-Teting_3.png)
In this testing, when there the distance is 3.8Km, the signal stable:
![Makerfabs-Lora-Distance-Test](http://v4-upload.goalsites.com/275/1577957640_Makerfabs-Lora-Distance-Test_4.png)
As it is really late and dark, and the seashore ends, we have no way to go further to test the mass range, so we have to ends our testing today... For sender/receiver codes, available here: https://www.makerfabs.com/wiki/index.php?title=Maduino_Lora_Radio_(433M/868M)