LoRa Radio Shield 433MHz

Based on those Maduino solutions, Makerfabs can also help to customize those boards with customer’s special requests. Contact sales@makerfabs.com for detailed info and further discussion. More detail you can read our PCB Design and PCBA Turnkey Solution.

The LoRa Radio Shield 433 MHz based on the RFM98W 433MHz module, which is a long-range transceiver on an Arduino shield form factor and based on the Open source library. The LoRa Shield allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
● Compatible with 3.3v or 5v I/O Arduino Board
● 168 dB maximum link budget
● +20 dBm - 100 mW constant RF output vs
● +14 dBm high-efficiency PA
● Programmable bit rate up to 300 kbps
● High sensitivity: down to -148 dBm
● Bullet-proof front end: IIP3 = -12.5 dBm
● Low RX current of 10.3 mA, 200 nA register retention
● Fully integrated synthesizer with a resolution of 61 Hz
● Dimension: 53mm x 47mm x 23mm

Package List:
● 1 x LoRa Radio Shield(433MHz)
● Schematic
● Datasheet
● Demo code
● LoRa Radio Shield user's manual
● Wiki
Contact us